Manifolds

It is designed to visually monitor the progress of the cooling water’s flow
To prevent cooling pipe from clogging and to make sure the cooling water flow out completely after cooling phase
It is closed circuit, so it can prevent contaminants
There will be no hot water spilled after die is cooled, hence safety operation can be perform

Ref: RP-P3-M12 – 1 piece – Pressure Switch, 3 bar, G1/4’’ M12 connector
Ref: RP-2130150 – 1 piece – LED cable for Pressure Switch M12
Ref: RP-CAPT-PR – 1 piece – Pressure sensor, 0-100 bars, G1/4’’ M12 connector
Ref: RP-CAPT-PR2 – 1 piece – Pressure sensor with display, 1-10 bars, G1/4’’ M12 connector
Ref: RP-CAPT-CABLE – 1 piece – Cable with femelle connector for Pressure Sensor M12

Manifold pressure switch

Ref: RP8-SC-1.1-R0 – 1 piece
8 entries, Core Pin Breakage, Visual Control

Ref: RP8-SC-1.0-P41 – 1 piece
8 entries, Core Pin Breakage, No Visual Control,
with Ø4 couplers

Ref: RP8-SC-1.1-P61S – 1 piece
8 entries, Core Pin Breakage, Visual Control,
with Ø6 couplers

Manifold pressure sensor

Ref: RP8-SC-2.1-R0 – 1 piece
8 entries, Core Pin Breakage, Visual Control

Ref: RP8-SC-2.0-P41 – 1 piece
8 entries, Core Pin Breakage, No Visual Control,
with Ø4 couplers

Ref: RP8-SC-2.1-P61S – 1 piece
8 entries, Core Pin Breakage, Visual Control,
with Ø6 couplers

Manifold pressure switch with visual display

Ref: RP8-SC-3.1-R0 – 1 piece
8 entries, Core Pin Breakage, Visual Control

Ref: RP8-SC-3.0-P41 – 1 piece
8 entries, Core Pin Breakage, No Visual Control,
with Ø4 couplers

Ref: RP8-SC-3.1-P61S – 1 piece
8 entries, Core Pin Breakage, Visual Control,
with Ø6 couplers